Product Description
Accessories for digital power analyzers include various voltage and current transformers, clamp-on current probes, and a selection of test leads.
CT60/ CT200/ CT1000/ CT1000A/ CT2000A AC/DC Current Sensor
AC/DC current sensors capable of highly accurate measurement starting in DC range.
AC/DC Split Core Current Sensor CT1000S
Industry leading high precision, high current AC/DC split core measurement. Compatible with power analyzers and waveform measurement instruments.
751552 Current Clamp-On Probe
- Wide dynamic range: 0 Arms to 400 Arms (AC); Max. 600 Apk (AC)
- Wide measurement frequency range: 20 Hz to 20 kHz (±5%)
- Basic accuracy: ±1.0% of rdg ±0.2 mV
- Current output model: 1mA/A
- Since this model is a voltage output type, you can use it for an oscilloscope.
96001/751552 Current Clamp-On Probe
Special AC-Input Clamp-on Probes for Large-current Hot Line Measurement
751522/751524 Current Sensor Unit
Current sensor unit accessories for digital power meters and power analyzers.
DC to 100 kHz/1000 a peak guaranteed calibration with power analyzers.
760901 30A High Accuracy Element
760901 30A High Accuracy Element. Includes external sensor input.
760902 5A High Accuracy Element
760902 5A High Accuracy Element. Includes external sensor input.
760903 Current Sensor Element
Current Sensor Element
Firmware version 3.01 or later of WT5000 main frame is required.
760813 Current Input Module
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
760812 Current Module
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
760811 Voltage Module
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
760851 Auxiliary Module
Sensor and voltage measurement module (up to three modules can be installed) Auxiliary (AUX) module
A1323EZ, A1324EZ, A1325EZ Shunt resistor boxes
Shunt resistor boxes for WT1800E /PD option.
758921 Fork terminal adapter
- 758921 Fork Terminal Adapters
- For fitting a 4mm banana plug to a fork terminal
- One black and one red clip
- 1000 Vrms-CAT II
758922 Small Alligator-Clip Adapter 300V
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.
758929 Large Alligator Clip Adapter 1000V
- Yokogawa 758929 Alligator Clip Adapter
- Rated at 1000V
- Attaches to 758917 test leads
- Sold in pairs black/red
758931 Screw-Fastened Safety Voltage Terminal Adapter Set
Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen Wrench.
758923 Spring Hold Safety Terminal Adapter Set
Two adapters in a set (spring-hold type).
B8213ZA Safety Current Terminal Adapter Set
Two adapters in a set for current input of the PX8000
366921 BNC to Banana-Jack (Female) Adapter 42V
BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V.
758924 BNC to Banana Conversion Adapter
For conversion between BNC and female banana plug
Applicable for ScopeCorder modules with BNC inputs.
B8506ZL Alligator Clipadapter Set
2 safety terminal – alligator clip adapters (red and black). Rating 1500 V
257875 RJ Sensor
For reference junction compensation sensor. Pt100, 1.95 m
761952 Safety Terminal Conversion Adapter Set
Female-female type adapters for 5 A element. Black/Red two adapters in a set.
761951 Safety Terminal Adapter Set
Screw-fastened type adapters for 30 A element. Black/Red two adapters in a set.
758917 Measurement Lead Set
- Set of 0.8m long red and black test leads
- Used with Power Analyzers and DMMs
- Used in combination with a pair of optional 758922 or 758929 alligator-clip adapters
- 1000 Vrms, 32 Arms CAT II
758933 Measurement lead
2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000V CAT IV/19 A
B8506WA Measurement Lead Set
2 pieces (red and black) in 1 set.
Length: 1.5 m, Rating: 80 A
B8506ZK Measurement Lead Set
2 voltage output cables (red and black). 1 m. Rating 1500 V
Use for circuits except Measurement Category II, III, IV.
A1589WL Direct Current Input Cable
Direct Current Input Cable (with Burden Resistor 2.7 Ohm) for WT1800E /PD2 option.
A1628WL Direct Current Input Cable
Direct Current Input Cable (without Burden Resistor) for WT1800E /PD2 option
A1559WL, A1560WL Dedicated Cable
Dedicated Cables for WT1800E /PD option.
705926 Connection Cable for DA4, DA12, Scanner Box (701953)
Applicable for ScopeCorder and WT300 series.
366925 BNC to BNC 2m Cable
BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.
761954/ 761955/ 761956 Dedicated Cable for the Current Sensor Element
Total length: 3 m/5 m/10 m
720911 External I/O cable
For DL850/E series, PX8000
761961 Power Adapter for Current Sensor
Adapter for connecting the current sensor power option (/PD2) of the WT1800R to split core current sensors.
701963 Soft carrying case
Three pockets are provided for storing accessories and the user’s manual.
B9316FX Printer Paper Roll
Printer Paper Roll
Thermal paper (10m) for WT1600, WT 1800, WT3000, & WT3000E – 1 roll
